Anzahl | Stückpreis |
---|---|
Bis 9 |
108,00 €*
149,00 €*
(27.52% gespart)
|
Bis 19 |
106,00 €*
149,00 €*
(28.86% gespart)
|
Bis 49 |
104,00 €*
149,00 €*
(30.2% gespart)
|
Ab 50 |
102,00 €*
149,00 €*
(31.54% gespart)
|
Nicht mehr verfügbar
Produktnummer:
RUT24006E000
Produktinformationen "Teltonika RUT240*06 - EU version"
industrieller Mobilfunk-Router
Kompaktes, robustes und leistungsfähiges Gerät, zugeschnitten auf industrielle M2M/IoT-Anwendungen. RUT240 verfügt über zwei Ethernet-Anschlüsse und eine drahtlose Schnittstelle mit Hotspot-Funktionalität. Dank WAN-Failover wird eine stabile Konnektivität gewährleistet, und die RutOS-Software entspricht den höchsten Sicherheitsstandards. Kompatibel mit RMS.
Bestellende: 31. Juli 2023
Produktionsende: 31. Dezember 2023
Support-Ende: 31. Juli 2028
Produktionsende: 31. Dezember 2023
Support-Ende: 31. Juli 2028
MOBILE | |
Mobile module | 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – UP to 236.8 kbps |
Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID |
SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
Black/White list | Operator black/white list |
Multiple PDN | Possibility to use different PDNs for multiple network access and services |
Band management | Band lock, Used band status display |
APN | Auto APN |
Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
Passthrough | Router assigns its mobile WAN IP address to another device on LAN |
WIRELESS | |
Wireless mode | IEEE 802.11b/g/n/, Access Point (AP), Station (STA) |
WiFi security | WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation |
SSID/ESSID | SSID stealth mode and access control based on MAC address |
WiFi users | Up to 50 simultaneous connections |
Wireless Hotspot | Captive portal (Hotspot), internal/external Radius server, built in customizable landing page |
ETHERNET | |
WAN | 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
LAN | 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
MODBUS TCP SLAVE | |
ID range | Respond to one ID in range [1;255] or any |
Allow Remote Access | Allow access through WAN |
Custom registers | MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality |
MODBUS TCP MASTER | |
Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) |
MODBUS DATA TO SERVER | |
Protocol | HTTP(S), MQTT, Azure MQTT |
MQTT GATEWAY | |
MQTT Gateway | Allows sending commands and receiving data from MODBUS Master through MQTT broker |
DNP3 | |
Supported modes | TCP Master, DNP3 Outstation |
SYSTEM CHARACTERISTICS | |
CPU | Atheros Hornet, MIPS 24Kc, 400 MHz |
RAM | 64 MB, DDR2 |
FLASH storage | 16 MB, SPI Flash |
INPUT / OUTPUT | |
Input | 1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high |
Output | 1 x Digital Output, Open collector output, max output 30 V, 300 mA |
Events | Email, RMS, SMS |
I/O juggler | Allows to set certain I/O conditions to initiate event |
POWER | |
Connector | 4-pin industrial DC power socket |
Input voltage range | 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max |
PoE (passive) | Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 50 VDC |
Power consumption | < 6.5 W Max |
PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS; SIM) | |
Ethernet | 2 x RJ45 ports, 10/100 Mbps |
I/O’s | 1 x Digital Input, 1 x Digital Output on 4-pin power connector |
Status LEDs | 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED |
SIM | 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder |
Power | 1 x 4-pin power connector |
Antennas | 2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors |
Reset | Reboot/User default reset/Factory reset button |
PHYSICAL SPECIFICATION | |
Casing material | Aluminium housing, plastic panels |
Dimensions (W x H x D) | 83 x 25 x 74 mm |
Weight | 125 g |
Mounting options | Bottom and sideways DIN rail mounting slots |
PACKAGE CONTAINS | |
|
Anmelden