Teltonika RUT241

Anzahl	Stückpreis
Bis 49	131,00 €* 145,00 €* (9.66% gespart)
Ab 50	127,00 €* 145,00 €* (12.41% gespart)

Preise exkl. MwSt. zzgl. Versandkosten

Versandfertig in 12 Tagen, Lieferzeit 1-3 Tage

Produktnummer: RUT241000000

Produktinformationen "Teltonika RUT241"

industrieller Mobilfunk-Router

Ausgerüstet mit 4G LTE, Wi-Fi und zwei Ethernet-Anschlüssen, bietet dieser Router eine ununterbrochene Verbindung mit einem Backup durch automatisches Failover. Industrielles Design, kompakte Größe, mehrere Anschlussschnittstellen und Kompatibilität mit RMS machen dieses Gerät zu einer hervorragenden Wahl für zahlreiche IoT- und M2M-Lösungen.

Datasheet DE

MOBILE
Mobile module	4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – UP to 236.8 kbps
Status	Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
SMS	SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD	Supports sending and reading Unstructured Supplementary Service Data messages
Black/White list	Operator black/white list
Multiple PDN	Possibility to use different PDNs for multiple network access and services
Band management	Band lock, Used band status display
APN	Auto APN
Bridge	Direct connection (bridge) between mobile ISP and device on LAN
Passthrough	Router assigns its mobile WAN IP address to another device on LAN
WIRELESS
Wireless mode	IEEE 802.11b/g/n/, Access Point (AP), Station (STA)
WiFi security	WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
SSID/ESSID	SSID stealth mode and access control based on MAC address
WiFi users	Up to 50 simultaneous connections
Wireless Hotspot	Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
ETHERNET
WAN	1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN	1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
MODBUS TCP SLAVE
ID range	Respond to one ID in range [1;255] or any
Allow Remote Access	Allow access through WAN
Custom registers	MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
MODBUS TCP MASTER
Supported functions	01, 02, 03, 04, 05, 06, 15, 16
Supported data formats	8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
MODBUS DATA TO SERVER
Protocol	HTTP(S), MQTT, Azure MQTT
MQTT GATEWAY
MQTT Gateway	Allows sending commands and receiving data from MODBUS Master through MQTT broker
DNP3
Supported modes	TCP Master, DNP3 Outstation
SYSTEM CHARACTERISTICS
CPU	Mediatek MIPS 24Kc 580 MHz
RAM	128 MB, DDR2
FLASH storage	16 MB, SPI Flash
INPUT / OUTPUT
Input	1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high
Output	1 x Digital Output, Open collector output, max output 30 V, 300 mA
Events	Email, RMS, SMS
I/O juggler	Allows to set certain I/O conditions to initiate event
POWER
Connector	4-pin industrial DC power socket
Input voltage range	9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
PoE (passive)	Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 50 VDC
Power consumption	< 6.5 W Max
PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS; SIM)
Ethernet	2 x RJ45 ports, 10/100 Mbps
I/O’s	1 x Digital Input, 1 x Digital Output on 4-pin power connector
Status LEDs	3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
SIM	1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
Power	1 x 4-pin power connector
Antennas	2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors
Reset	Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
Casing material	Aluminium housing, plastic panels
Dimensions (W x H x D)	83 x 25 x 74 mm
Weight	125 g
Mounting options	Bottom and sideways DIN rail mounting slots
PACKAGE CONTAINS
Router RUT241 9 W EU PSU 2x LTE antennas (swivel, SMA male) 1 x WiFi antenna (swivel, RP-SMA mal) Ethernet cable (1.5 m) SIM Adapter kit QSG (Quick Start Guide) RMS Flyer Packaging box

Ethernet Ports:	1, 2
Mobilfunkstandards:	2G, 3G, 4G
SIM Karten Slots:	1
Wifi Standards:	Dual-Band 802.11 b/g/n/ac, 2.4 GHz 802.11 b/g/n

0 von 0 Bewertungen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.

Anmelden

Ihre E-Mail-Adresse

Ihr Passwort

Keine Bewertungen gefunden. Teilen Sie Ihre Erfahrungen mit anderen.

Zubehör

Tipp

Teltonika BAT120 Batterie für unterbrechungsfreie Stromversorgung

Mit der BAT120 können Benutzer ein kompatibles Teltonika Networks Gerät bis zu 6 Stunden in Betrieb halten. Sie hat einen Verpolungs- und Überspannungsschutz für den Eingang und einen 3A Überstromschutz für den Ausgang. Diese robuste und unterbrechungsfreie Stromquelle ist perfekt für Anwendungen, die eine konstante Konnektivität von ihren Teltonika Networks Geräten benötigen, auch wenn Stromausfälle oder -schwankungen auftreten. HIGHLIGHTS • 4-polige industrielle DC-Steckdose • 2300 mAh 17 Wh Batteriekapazität • 3A Überstromschutz • Verpolungsschutz, Überspannungsschutz • 2 x 18650 Li-Ion Zellen • kompatibel mit RUT2xx, RUT95x, RUT3xx, RUTXxx, TRB14x, TRB2xx, TSW110, TCR100 VERPACKUNGSINHALT • BAT120 • 24W-NETZTEIL • 4-poliges auf 4-poliges Netzkabel • QSG (Schnellstartanleitung) • Verpackungsbox

Ab 81,00 €*

Details

Teltonika Hutschienen Adapter PR5MEC00

5,12 €* 5,50 €* (6.91% gespart)

Teltonika PR14RD35 WIFI Dual-Band SMA Antenne

Datasheet

6,49 €*

Teltonika PR1KC640 5G COMBO MIMO MOBILE/GNSS/ WIFI DACH-SMA-ANTENNE

MECHANICAL/ENVIRONMENTAL Mounting method Screw Radome ingress protection rating IP65 (exclude cable outlet) Radome material UV-Resistant ABS/PC Housing dimensions 189 x 182 x 85 mm Cable 7 x LMR100, 3000 mm Operating temperature - 40 ~ +85 °C Weight 535 ± 10 g Recomended mounting dimensions Hole ø28 mm, panel thickness MAX 8 mm RoHS Compliant ✓ 5G MOBILE MIMO ANTENNA Frequency Range 617 - 960 / 1710 - 2690 / 2900 - 4200 MHz Polarization Linear Gain 4.0 dBi V.S.W.R ≤3.0 Impedance 50 Ω Connector type and count 4x SMA Male GNSS ANTENNA Frequency range 1164 - 1300 / 1559 - 1610 MHz Polarization RHCP LNA Gain 40 ± 2 dB V.S.W.R < 2.0 Impedance 50 Ω Supply voltage 3 - 12 VDC Current consumption ≤60 mA Connector type and count SMA Male WIFI MIMO ANTENNA Frequency range 2400 - 2483.5 / 4900 - 5925 MHz Polarization Linear Gain 4.0 dBi V.S.W.R < 2.5 Impedance 50 Ω Connector type and count 2x RP-SMA Male Datasheet

99,50 €*

Teltonika PR1KCL25 - Combo MIMO Mobile SMA Dachantenne

Combo-MIMO Mobile Dachantenne SMA Frequenzbereich: 698-960/1710-2690 MHz Polarisation Linear Main antenna gain 2.5 dBi Aux antenna gain 2.0 dBi V.S.W.R <3.0 Impedanz 50 Ω Anschluss SMA Male

13,20 €*

Teltonika PR1KCL28 COMBO QUAD MOBILE/GNSS SMA DACHANTENNE

MECHANICAL/ENVIRONMENTAL Mounting method Screw Radome ingress protection rating IP65 (exclude cable outlet) Radome material UV resistant plastic and cable Housing dimensions Ø 110.0 x 53.0 mm Cable 5x RG174, 3000 mm Operating temperature - 40 ~ +85 °C Weight 525 ± 10 g UV resistance ✓ RoHS compliant ✓ GNSS ANTENNA Frequency range 1575.42 ± 3 MHz Polarization RHCP LNA gain 28 ± 2 dB LNA noise figure ≤ 1.5 dB V.S.W.R < 2.0 Impedance 50 Ω Supply voltage 3 – 5 VDC Current consumption < 15 mA Connector type and count SMA Male LTE MIMO ANTENNA Frequency range 698 – 960, 1710 – 2690 MHz Polarization Linear Gain 3.0 dBi V.S.W.R < 3.0 Impedance 50 Ω Connector type and count 4x SMA Male

45,00 €*

Teltonika PR1KCO28 COMBO MIMO MOBILE/GNSS/WIFI SMA DACHANTENNE

MECHANICAL/ENVIRONMENTAL Mounting method Screw Radome ingress protection rating IP65 (exclude cable outlet) Radome material ABS Housing dimensions Ø 110 x 55 mm Cable 5x RG174, 3000 mm Operating temperature - 40 ~ +85 °C Weight 535 ± 10 g RoHS Compliant ✓ GNSS ANTENNA Frequency range 1575.42 – 1610 MHz Polarization RHCP LNA gain 28 ± 2 dB LNA noise figure ≤ 1.5 dB V.S.W.R < 2.0 Impedance 50 Ω Supply voltage 3 – 5 VDC Current consumption < 15 mA Connector type and count SMA Male LTE MIMO ANTENNA Frequency range 698 – 960, 1710 – 2690 MHz Polarization Linear Gain 3.0 dBi V.S.W.R < 3.0 Impedance 50 Ω Connector type and count 2x SMA Male WIFI ANTENNA Frequency range 2400 – 2483.5, 4900 – 5825 MHz Polarization Linear Gain 2.0 dBi V.S.W.R < 2.5 Impedance 50 Ω Connector type and count 2x RP-SMA Male

38,00 €*

Teltonika PR1KCS28 COMBO SISO Mobile/GNSS/WIFI SMA Dachantenne

1 x WiFi SMA Anschluss 1 x LTE SMA Anschluss 1 x GNSS SMA Anschluss

23,10 €*

Teltonika PR1KRD30 WIFI Dual-Band magnetische SMA Antenne

Datasheet

6,05 €*

Teltonika PR1KRF30 WIFI magnetische SMA Antenne

PARAMETER Frequenzband 2400 ~ 2500 MHz Polarisation Linear Signalverstärkung 3.0 dBi VSWR 2.0 Impedanz 50 Ω Kabel RG174, 1500 mm Anschlusstyp RP-SMA Male Anschlussmethode Magnet RoHS ✓

6,60 €*

Teltonika PR1KS210 Mobile magnetische SMA Antenne

PARAMETER Frequenzbereich 699 ~ 868, 1850 ~ 2690 MHz Polarisation Linear Signalstärke 1.0 dBi VSWR 3.0 Impedanz 50 Ω Kable RG174, 3000 mm Verbindung SMA Male Befestigung Magnet RoHS ✓

5,50 €*

Teltonika PR1URF51 WiFi SMA Antenne

5,52 €*

Teltonika PR1US440 mobile SMA Antenne

5,90 €*

Teltonika PR1US450 abgewinkelte kompakte Mobilantenne

PARAMETER RATED VALUE Frequency Range 700-2700 MHzPolarization LinearGain 5.0 dBiV.S.W.R ≤ 1.8Input Impedance 50 ΩConnector SMA Male (straight)

4,40 €*

Teltonika PR2LA15B Ethernet cable 1.5M

1,65 €*

Teltonika PR5MEC11 Compact DIN Rail KIT

TECHNICAL DATA Mounting type 35 mm DIN Rail Material ABS + PC plastic Dimensions 70 x 25 x 14.5 mm Screws included Philips Pan head screw #6-32×3/16, 2 pcs

2,80 €*

Teltonika PR5MEC12 | Surface Mounting Kit for TELTONIKA Router

With the surface mounting kit you can easily mount your TELTONIKA router on flat surfaces. STANDARD PACKAGE CONTAINS Surface mounting kit Philips Pan Head screw #6-32×3/16, 2pcs

3,20 €* 3,30 €* (3.03% gespart)

Teltonika PR5MEC15 Connector Set

4,50 €*

Teltonika PR5MEC22 Surface Clip Holder Kit

STANDARD PACKAGE CONTAINS Surface Clip Holder Kit Self-tapping screws: DIN 14566 (4.2 mm x 32 mm), 2 pcs; Plastic expansion anchors: 6 mm x 30 mm, 2 pcs

2,80 €*

Teltonika RMS Lizenz / Kredit

Das Teltonika Networks Remote Management System ist eine benutzerfreundliche All-in-One-IoT-Plattform, die eine einfache Möglichkeit bietet, den Überblick über Ihre vernetzte Lösung zu behalten. Es handelt sich um eine leistungsstarke Software, die den Fernzugriff und die Verwaltung aller angeschlossenen Teltonika-Netzwerke und Geräte von Drittanbietern ermöglicht. Sie benötigen einen Credit pro Gerät und Monat.

Ab 1,50 €*

Details

Teltonika RMS Management Package - 10 years

47,00 €*

Teltonika RMS Management Package - 3 years

28,00 €*

Teltonika RMS Management Package - 5 years

36,00 €*

Teltonika TAP200

Wi-Fi 5 ACCESS POINT Ausgestattet mit Dualband-Technologie, schnellem Roaming und einem RJ45-Port mit PoE-in-Funktionalität ist der TAP200 von Teltonika Networks ein Wi-Fi 5 Wireless Access Point, der die Wi-Fi-Abdeckung in Räumen mit mittlerer Dichte verbessert, in denen eine hohe Netzwerkleistung erforderlich ist. Der TAP200 verfügt über eine integrierte Halterung für eine schnelle und einfache Installation und ein schlankes Design, das sich nahtlos in Einzelhandels-, Unternehmens- oder andere Umgebungen einfügt. WIRELESS Wireless mode 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO) WiFi security WPA2-EAP/WPA3-EAP Mixed Mode, WPA3-EAP, WPA2-PSK/WPA3-SAE Mixed Mode, WPA3-SAE, OWE, WPA-PSK/WPA2-PSK Mixed Mode, WPA2-PSK, WPA2-EAP; AES-CCMP, TKIP, Auto Cipher modes, isolate clients SSID/ESSID ESSID stealth mode (Hide SSID) WiFi users Up to 100 simultaneous connections Wireless mesh/roaming Fast roaming (802.11r) Wireless MAC filter Whitelist, blacklist Wireless QR code generator Once scanned, a user will automatically enter your network without needing to input login information. ETHERNET Ethernet 1 x RJ45 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover NETWORK Network protocols TCP, UDP, IPv4, IPv6, ICMP, HTTP, HTTPS, SSL/TLS, ARP, SSH, DHCP client, SNMP SYSTEM CHARACTERISTICS CPU MediaTek, Dual-Core, 880 MHz, MIPS 1004Kc RAM 256 MB, DDR3 FLASH storage 16MB, SPI NOR Flash POWER Connector RJ45 Socket Input voltage range 44.0 – 57.0 V PoE standards 802.3af PoE Class 1 Power consumption Idle: < 4 W / Max: < 5.5 W PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS; SIM) Ethernet 1 x RJ45 port, 10/100/1000 Mbps Status LEDs 1 x Power LED (can be turned off from web-UI) Antennas 2 x Internal for 2.4 GHz Wi-Fi, 2 x Internal for 5 GHz Wi-Fi Antennas specifications 2 x 2400 - 2500 MHz, 50 Ω, VSWR <2.7, gain < 4.9 dBi, omnidirectional 2 x 5150 - 5850 MHz, 50 Ω, VSWR <2, gain < 5.02 dBi, omnidirectional Reset Reboot/User default reset/Factory reset button PHYSICAL SPECIFICATION Casing material UV stabilized plastic Dimensions Ø 158 mm x 30 mm Weight 190 g Mounting options AP Mounting Bracket (for ceiling mount) OPERATING ENVIRONMENT Operating temperature -40 °C to 75 °C Operating humidity 10% to 90% non-condensing Ingress Protection Rating IP30 STANDARD PACKAGE* Access Point TAP200 QSG (Quick Start Guide) Wi-Fi Information sticker Packaging box *Standard package contents may differ based on standard order codes.

40,95 €*