Kleines industrielles LTE Cat 1-Gateway. Ausgestattet mit verschiedenen Inputs/Outputs und einem Micro-USB Port, einschließlich Digital, Relay, Analog und Isolated. Perfekt für Anwendungsfälle, in denen Geräte über I/O aus der Ferne verwaltet werden müssen.   MOBILE     Mobile module 4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID SMS   SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP USSD Supports sending and reading Unstructured Supplementary Service Data messages Black/White list Operator black/white list Multiple PDN Possibility to use different PDNs for multiple network access and services Band management Band lock, Used band status display APN Auto APN Bridge Direct connection (bridge) between mobile ISP and device on LAN Passthrough   Router assigns its mobile WAN IP address to another device on LAN NETWORK     Routing Static routing Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection Firewall Port forward, traffic rules, custom rules DHCP Static and dynamic IP allocation, DHCP Relay Network backup Mobile, VRRP, Wired options, each of which can be used as an automatic Failover SSHFS Possibility to mount remote file system via SSH protocol   MODBUS TCP SLAVE     ID range Respond to one ID in range [1;255] or any Allow Remote Access Allow access through WAN Custom registers   MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality MODBUS TCP MASTER     Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats   8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) DATA TO SERVER   Protocol   HTTP(S), MQTT, Azure MQTT MQTT GATEWAY     MQTT Gateway   Allows sending commands and receiving data from MODBUS Master through MQTT broker DNP3     Supported modes   TCP Master, DNP3 Outstation SYSTEM CHARACTERISTICS   CPU ARM Cortex-A7 1.2 GHz RAM 128 MB, DDR2 FLASH storage   512 MB, SPI Flash INPUT / OUTPUT     Input 2 x Digital inputs (configurable passive or active), 1 x Isolated input, 1 x Analog input ( with 4-20 mA capability). 1 x Configurable Inputs. Digital input 0 - 5 V detected as logic low, 8 - 30 V detected as logic high Output 2 x Relay outputs (latching and non latching). 1 x Configurable Output, Open collector output, max output 30 V, 300 mA Events Email, RMS, SMS I/O juggler   Allows to set certain I/O conditions to initiate event POWER     Connector 4-pin industrial DC power socket Input voltage range 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max Power consumption   < 5 W PHYSICAL INTERFACES   I/O’s 3 x Digital Inputs, 1 x Analog input, 2 x Relays on 16 pin connector, 2 x I/O pins on 4 pin power connector Status LEDs 3 x connection type status LEDs, 5 x connection strength LEDs, 1 x Power LED SIM 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V Power 1 x 4-pin power connector 1-Wire 1 x 1-Wire interface on 16 pin connector Antennas 1 x SMA for LTE USB 1 x Virtual network interface via micro USB Reset   Reboot/User default reset/Factory reset button PHYSICAL SPECIFICATION   Casing material Aluminium housing Dimensions (W x H x D) 74.5 x 25 x 64.4 mm Weight 136 g Mounting options   Bottom and sideways DIN rail, Flat surface OPERATING ENVIRONMENT   Operating temperature -40 °C to 75 °C Operating humidity 10% to 90% non-condensing Ingress Protection Rating IP30   PACKAGE CONTAINS     TRB141 Gate 9 W PSU 1x LTE antenna (magnetic mount, SMA male, 3 m cable) Micro-USB cable (0.8 m) 1x hex key I/O connector QSG (Quick Start Guide) Packaging box

Standard Paket enthält 1 x TRB140 1 x 9W Netzteil 1 x LTE SMA Antenne (magnetisch, 3 m Kabel) 1x Micro-USB Kabel (0.8 m) 1 x LAN Kabel 1 x QSG (Quick Start Guide) 1 x Karton

  industrieller Mobilfunk-Router Kompaktes, robustes und leistungsfähiges Gerät, zugeschnitten auf industrielle M2M/IoT-Anwendungen. RUT240 verfügt über zwei Ethernet-Anschlüsse und eine drahtlose Schnittstelle mit Hotspot-Funktionalität. Dank WAN-Failover wird eine stabile Konnektivität gewährleistet, und die RutOS-Software entspricht den höchsten Sicherheitsstandards. Kompatibel mit RMS.   Bestellende: 31. Juli 2023 Produktionsende: 31. Dezember 2023 Support-Ende: 31. Juli 2028       MOBILE     Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – UP to 236.8 kbps Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID SMS   SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP USSD Supports sending and reading Unstructured Supplementary Service Data messages Black/White list Operator black/white list Multiple PDN Possibility to use different PDNs for multiple network access and services Band management Band lock, Used band status display APN Auto APN Bridge Direct connection (bridge) between mobile ISP and device on LAN Passthrough   Router assigns its mobile WAN IP address to another device on LAN WIRELESS     Wireless mode IEEE 802.11b/g/n/, Access Point (AP), Station (STA) WiFi security WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation SSID/ESSID SSID stealth mode and access control based on MAC address WiFi users Up to 50 simultaneous connections Wireless Hotspot   Captive portal (Hotspot), internal/external Radius server, built in customizable landing page ETHERNET     WAN 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX LAN   1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX MODBUS TCP SLAVE     ID range Respond to one ID in range [1;255] or any Allow Remote Access Allow access through WAN Custom registers   MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality MODBUS TCP MASTER   Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats   8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) MODBUS DATA TO SERVER   Protocol   HTTP(S), MQTT, Azure MQTT MQTT GATEWAY     MQTT Gateway   Allows sending commands and receiving data from MODBUS Master through MQTT broker DNP3     Supported modes   TCP Master, DNP3 Outstation SYSTEM CHARACTERISTICS   CPU Atheros Hornet, MIPS 24Kc, 400 MHz RAM 64 MB, DDR2 FLASH storage   16 MB, SPI Flash INPUT / OUTPUT     Input 1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high Output 1 x Digital Output, Open collector output, max output 30 V, 300 mA Events Email, RMS, SMS I/O juggler   Allows to set certain I/O conditions to initiate event POWER     Connector 4-pin industrial DC power socket Input voltage range 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max PoE (passive)   Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 50 VDC Power consumption   < 6.5 W Max PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS; SIM)   Ethernet 2 x RJ45 ports, 10/100 Mbps I/O’s 1 x Digital Input, 1 x Digital Output on 4-pin power connector Status LEDs 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED SIM 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder Power 1 x 4-pin power connector Antennas 2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors Reset   Reboot/User default reset/Factory reset button PHYSICAL SPECIFICATION   Casing material Aluminium housing, plastic panels Dimensions (W x H x D) 83 x 25 x 74 mm Weight 125 g Mounting options   Bottom and sideways DIN rail mounting slots PACKAGE CONTAINS     Router RUT240 9 W PSU 2x LTE antennas (swivel, SMA male) 1 x WiFi antenna (swivel, RP-SMA mal) Ethernet cable (1.5 m) SIM Adapter kit QSG (Quick Start Guide) RMS Flyer Packaging box

  industrieller Mobilfunk-Router Ausgerüstet mit 4G LTE, Wi-Fi und zwei Ethernet-Anschlüssen, bietet dieser Router eine ununterbrochene Verbindung mit einem Backup durch automatisches Failover. Industrielles Design, kompakte Größe, mehrere Anschlussschnittstellen und Kompatibilität mit RMS machen dieses Gerät zu einer hervorragenden Wahl für zahlreiche IoT- und M2M-Lösungen.     MOBILE     Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – UP to 236.8 kbps Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID SMS   SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP USSD Supports sending and reading Unstructured Supplementary Service Data messages Black/White list Operator black/white list Multiple PDN Possibility to use different PDNs for multiple network access and services Band management Band lock, Used band status display APN Auto APN Bridge Direct connection (bridge) between mobile ISP and device on LAN Passthrough   Router assigns its mobile WAN IP address to another device on LAN WIRELESS     Wireless mode IEEE 802.11b/g/n/, Access Point (AP), Station (STA) WiFi security WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation SSID/ESSID SSID stealth mode and access control based on MAC address WiFi users Up to 50 simultaneous connections Wireless Hotspot   Captive portal (Hotspot), internal/external Radius server, built in customizable landing page ETHERNET     WAN 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX LAN   1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX MODBUS TCP SLAVE     ID range Respond to one ID in range [1;255] or any Allow Remote Access Allow access through WAN Custom registers   MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality MODBUS TCP MASTER     Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats   8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) MODBUS DATA TO SERVER   Protocol   HTTP(S), MQTT, Azure MQTT MQTT GATEWAY     MQTT Gateway   Allows sending commands and receiving data from MODBUS Master through MQTT broker DNP3     Supported modes   TCP Master, DNP3 Outstation SYSTEM CHARACTERISTICS   CPU Mediatek MIPS 24Kc 580 MHz RAM 128 MB, DDR2 FLASH storage   16 MB, SPI Flash INPUT / OUTPUT     Input 1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high Output 1 x Digital Output, Open collector output, max output 30 V, 300 mA Events Email, RMS, SMS I/O juggler   Allows to set certain I/O conditions to initiate event POWER     Connector 4-pin industrial DC power socket Input voltage range 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max PoE (passive) Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 50 VDC Power consumption   < 6.5 W Max PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS; SIM)   Ethernet 2 x RJ45 ports, 10/100 Mbps I/O’s 1 x Digital Input, 1 x Digital Output on 4-pin power connector Status LEDs 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED SIM 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder Power 1 x 4-pin power connector Antennas 2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors Reset   Reboot/User default reset/Factory reset button PHYSICAL SPECIFICATION   Casing material Aluminium housing, plastic panels Dimensions (W x H x D) 83 x 25 x 74 mm Weight 125 g Mounting options   Bottom and sideways DIN rail mounting slots PACKAGE CONTAINS     Router RUT241 9 W PSU 2x LTE antennas (swivel, SMA male) 1 x WiFi antenna (swivel, RP-SMA mal) Ethernet cable (1.5 m) SIM Adapter kit QSG (Quick Start Guide) RMS Flyer Packaging box  

  industrieller Mobilfunk-Router Kompaktes, robustes und leistungsfähiges Gerät, zugeschnitten auf industrielle M2M/IoT-Anwendungen. RUT240 verfügt über zwei Ethernet-Anschlüsse und eine drahtlose Schnittstelle mit Hotspot-Funktionalität. Dank WAN-Failover wird eine stabile Konnektivität gewährleistet, und die RutOS-Software entspricht den höchsten Sicherheitsstandards. Kompatibel mit RMS.   Bestellende: 31. Juli 2023 Produktionsende: 31. Dezember 2023 Support-Ende: 31. Juli 2028     MOBILE     Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – UP to 236.8 kbps Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID SMS   SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP USSD Supports sending and reading Unstructured Supplementary Service Data messages Black/White list Operator black/white list Multiple PDN Possibility to use different PDNs for multiple network access and services Band management Band lock, Used band status display APN Auto APN Bridge Direct connection (bridge) between mobile ISP and device on LAN Passthrough   Router assigns its mobile WAN IP address to another device on LAN WIRELESS     Wireless mode IEEE 802.11b/g/n/, Access Point (AP), Station (STA) WiFi security WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation SSID/ESSID SSID stealth mode and access control based on MAC address WiFi users Up to 50 simultaneous connections Wireless Hotspot   Captive portal (Hotspot), internal/external Radius server, built in customizable landing page ETHERNET     WAN 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX LAN   1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX MODBUS TCP SLAVE     ID range Respond to one ID in range [1;255] or any Allow Remote Access Allow access through WAN Custom registers   MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality MODBUS TCP MASTER   Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats   8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) MODBUS DATA TO SERVER   Protocol   HTTP(S), MQTT, Azure MQTT MQTT GATEWAY     MQTT Gateway   Allows sending commands and receiving data from MODBUS Master through MQTT broker DNP3     Supported modes   TCP Master, DNP3 Outstation SYSTEM CHARACTERISTICS   CPU Atheros Hornet, MIPS 24Kc, 400 MHz RAM 64 MB, DDR2 FLASH storage   16 MB, SPI Flash INPUT / OUTPUT     Input 1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high Output 1 x Digital Output, Open collector output, max output 30 V, 300 mA Events Email, RMS, SMS I/O juggler   Allows to set certain I/O conditions to initiate event POWER     Connector 4-pin industrial DC power socket Input voltage range 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max PoE (passive)   Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 50 VDC Power consumption   < 6.5 W Max PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS; SIM)   Ethernet 2 x RJ45 ports, 10/100 Mbps I/O’s 1 x Digital Input, 1 x Digital Output on 4-pin power connector Status LEDs 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED SIM 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder Power 1 x 4-pin power connector Antennas 2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors Reset   Reboot/User default reset/Factory reset button PHYSICAL SPECIFICATION   Casing material Aluminium housing, plastic panels Dimensions (W x H x D) 83 x 25 x 74 mm Weight 125 g Mounting options   Bottom and sideways DIN rail mounting slots PACKAGE CONTAINS     Router RUT240 9 W PSU 2x LTE antennas (swivel, SMA male) 1 x WiFi antenna (swivel, RP-SMA mal) Ethernet cable (1.5 m) SIM Adapter kit QSG (Quick Start Guide) RMS Flyer Packaging box  

industrieller Mobilfunk-Router RUT951 bietet Dual-SIM 4G-Mobilfunkkonnektivität in Kombination mit WI-FI und 4 Ethernet-Schnittstellen, um die Anforderungen der verschiedensten IoT-Lösungen zu erfüllen. Powered by RutOS, das Anpassungsmöglichkeiten für den professionellen Einsatz, Automatisierungsfunktionen und Sicherheit auf höchstem Niveau für ihre Lösung bietet.     MOBILE     Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – UP to 236.8 kbps SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID SMS   SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP USSD Supports sending and reading Unstructured Supplementary Service Data messages Black/White list Operator black/white list Multiple PDN Possibility to use different PDNs for multiple network access and services Band management Band lock, Used band status display APN Auto APN Bridge Direct connection (bridge) between mobile ISP and device on LAN Passthrough   Router assigns its mobile WAN IP address to another device on LAN WIRELESS     Wireless mode IEEE 802.11b/g/n/, Access Point (AP), Station (STA) WiFi security WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation SSID/ESSID SSID stealth mode and access control based on MAC address WiFi users Up to 100 simultaneous connections Wireless Hotspot   Captive portal (Hotspot), internal/external Radius server, built in customizable landing page ETHERNET     WAN 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX LAN   3 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX MODBUS TCP SLAVE     ID range Respond to one ID in range [1;255] or any Allow Remote Access Allow access through WAN Custom registers   MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality MODBUS TCP MASTER     Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats   8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) MODBUS DATA TO SERVER   Protocol   HTTP(S), MQTT, Azure MQTT MQTT GATEWAY     MQTT Gateway   Allows sending commands and receiving data from MODBUS Master through MQTT broker DNP3     Supported modes   TCP Master, DNP3 Outstation SYSTEM CHARACTERISTICS   CPU Mediatek MIPS 24Kc 580 MHz RAM 128 MB, DDR2 FLASH storage   16 MB, SPI Flash INPUT / OUTPUT     Input 1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high Output 1 x Digital Output, Open collector output, max output 30 V, 300 mA Events Email, RMS, SMS I/O juggler   Allows to set certain I/O conditions to initiate event POWER     Connector 4-pin industrial DC power socket Input voltage range 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max PoE (passive) Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 50 VDC Power consumption   < 2 W idle, < 7 W Max PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS; SIM)   Ethernet 4 x RJ45 ports, 10/100 Mbps I/O’s 1 x Digital Input, 1 x Digital Output on 4-pin power connector Status LEDs 1 x bi- color connection status LED, 5 x Connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED SIM 2 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional) Antennas 2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors Reset   Reboot/User default reset/Factory reset button PHYSICAL SPECIFICATION   Casing material Aluminium housing, plastic panels Dimensions (W x H x D) 110 x 50 x 100 mm Weight 287 g Mounting options   DIN rail (can be mounted on two sides), flat surface placement PACKAGE CONTAINS     Router RUT951 9 W PSU 2x LTE antennas (swivel, SMA male) 2 x WiFi antenna (swivel, RP-SMA mal) Ethernet cable (1.5 m) SIM Adapter kit QSG (Quick Start Guide) Packaging box  

STANDARD PACKAGE CONTAINSRouter RUT9569 W PSU2 x LTE antennas (magnetic mount, SMA male, 3 m cable)2 x WiFi antennas (magnetic mount, RP-SMA male, 1.5 m cable)GNSS antenna (adhesive , SMA male, 3 m cable)RS485 connector blockI/O connector blockEthernet cable (1.5 m)SIM Adapter kitQSG (Quick Start Guide)Packaging box  Connectivity: 4G/LTE (Cat 4), 3G, 2G Dual SIM GNSS I/O – multiple digital and analog inputs and outputs forequipment control and event notification Serial Ports - RS232/RS485 serial communicationinterfaces RMS - compatible with Teltonika Remote ManagementSystem

STANDARD PACKAGE CONTAINSRouter RUTX0918 W PSU2 x LTE antennas (swivel, SMA male)1 x GNSS antenna (adhesive, SMA male, 3 m cable)SIM Adapter kitEthernet cable (1.5 m)QSG (Quick Start Guide)RMS FlyerPackaging box

Standard Paket enthält:Router RUTX1118 W PSU2 x LTE antennas (swivel, SMA male)2 x WiFi antennas (swivel, RP-SMA male)1 x GNSS antenna (adhesive, SMA male, 3 m cable)1 x Bluetooth antenna (magnetic mount, RP-SMA male, 1.5 m cable)Ethernet cable (1.5 m)SIM Adapter kitQSG (Quick Start Guide)RMS FlyerPackaging box