#

Teltonika TRB142 Industrie LTE Gateway mit RS232 Anschluss - EU version

Produktinformationen "Teltonika TRB142 Industrie LTE Gateway mit RS232 Anschluss - EU version"

 
TRB142 verfügt über eine häufig verwendete RS232-Schnittstelle für die Fernverwaltung.
Es ist mit geschäftskritischen LTE Cat 1-Funktionen und Software ausgestattet
die auf OpenWRT basiert und somit ein hohes Maß an Anpassungsfähigkeit bietet.
 
 
 
 
MOBILE
 
 
Mobile module 4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
Status IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMS

 
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD Supports sending and reading Unstructured Supplementary Service Data messages
Black/White list Operator black/white list (by country or separate operators)
Multiple PDN Possibility to use different PDNs for multiple network access and services
Band management Band lock, Used band status display
APN Auto APN
Bridge Direct connection (bridge) between mobile ISP and device on LAN
Passthrough

 
Gateway assigns its mobile WAN IP address to another device on LAN
NETWORK
 
 
Routing Static routing
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT
VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forward, traffic rules, custom rules
Firewall status page View all your Firewall statistics, rules, and rule counters
Ports management View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
Network topology Visual representation of your network, showing which devices are connected to which other devices
DHCP Static and dynamic IP allocation, DHCP Relay
QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS Supported >25 service providers, others can be configured manually
Network backup Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
SSHFS Possibility to mount remote file system via SSH protocol
 
MODBUS
 
 
Supported modes Server, Client
Supported connection types TCP, RTU(RS232)
Custom registers

 
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
Supported data formats 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
 
DATA TO SERVER
 
Protocol

 
HTTP(S), MQTT, Azure MQTT, Kinesis
Data to server Extract parameters from multiple sources and different protocols, and send them all to a single server
 
MQTT GATEWAY
 
 
MQTT Gateway

 
Allows sending commands and receiving data from MODBUS Server through MQTT broker
DNP3
 
 
Supported modes

 
TCP Master, DNP3 Outstation, RTU Master
SYSTEM CHARACTERISTICS
 
CPU ARM Cortex-A7 1.2 GHz
RAM 128 MB, DDR2
FLASH storage

 
512 MB, SPI Flash
INPUT / OUTPUT
 
 
Input
2 x Configurable Inputs/Outputs. Digital input 0 - 5 V detected as logic low, 8 - 30 V detected as logic high. Open collector
Configurable I/O output, max output 30 V, 300 mA. Configurable Inputs/Outputs are not available in TRB142*2****
Output HTTP POST/GET, Schedule
Events Email, RMS, SMS
I/O juggler

 
Allows to set certain I/O conditions to initiate event
POWER
 
 
Connector 4-pin industrial DC power socket
Input voltage range 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
Power consumption

 
< 5 W
PHYSICAL INTERFACES
 
I/O’s 2 x Configurable I/O pins on 4 pin power connector (I/O not available in TRB142*2****)
Status LEDs 3 x connection type status LEDs, 5 x connection strength LEDs, 1 x Power LED
SIM 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
Power 1 x 4-pin power connector
Antennas 1 x SMA for LTE
USB 1 x Virtual network interface via micro USB
RS232 1 x DB9 socket
Reset

 
Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
 
Casing material Aluminium housing
Dimensions (W x H x D) 74.5 x 25 x 64.4 mm
Weight 135 g
Mounting options

 
Bottom and sideways DIN rail, Flat surface
OPERATING ENVIRONMENT
 
Operating temperature -40 °C to 75 °C
Operating humidity 10% to 90% non-condensing
Ingress Protection Rating IP30

 
PACKAGE CONTAINS
 
 
  • TRB142
  • 9 W EU PSU PR3PUEU3
  • 1x Mobile antenna (magnetic mount, SMA male, 3 m cable)
  • Micro-USB cable (0.8 m)
  • 1x hex key
  • QSG (Quick Start Guide)
  • Packaging box




 
Mobilfunkstandards: 2G, 3G, 4G

0 von 0 Bewertungen

Durchschnittliche Bewertung von 0 von 5 Sternen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.