Teltonika RUT241

Quantity Unit price
To 49
€131.00*
€145.00* (9.66% saved)
From 50
€127.00*
€145.00* (12.41% saved)

Available, delivery time: 1-3 days

Product number: RUT241000000
Product information "Teltonika RUT241"
 
industrial cellular Router

Equipped with 4G LTE, Wi-Fi, and two Ethernet ports, RUT241 offers unstoppable connection continuity with automatic WAN failover. Industrial design, compact size, multiple connection interfaces, and compatibility with RMS make this device an excellent fit in numerous IoT and M2M solutions.
 
 
 
 
MOBILE
 
 
Mobile module4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – UP to 236.8 kbps
StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
SMS

 
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSDSupports sending and reading Unstructured Supplementary Service Data messages
Black/White listOperator black/white list
Multiple PDNPossibility to use different PDNs for multiple network access and services
Band managementBand lock, Used band status display
APNAuto APN
BridgeDirect connection (bridge) between mobile ISP and device on LAN
Passthrough


 
Router assigns its mobile WAN IP address to another device on LAN
WIRELESS
 
 
Wireless modeIEEE 802.11b/g/n/, Access Point (AP), Station (STA)
WiFi securityWPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
SSID/ESSIDSSID stealth mode and access control based on MAC address
WiFi usersUp to 50 simultaneous connections
Wireless Hotspot


 
Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
ETHERNET
 
 
WAN1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN

 
1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
MODBUS TCP SLAVE
 
 
ID rangeRespond to one ID in range [1;255] or any
Allow Remote AccessAllow access through WAN
Custom registers

 
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
MODBUS TCP MASTER
 
 
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats

 
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
MODBUS DATA TO SERVER
 
Protocol

 
HTTP(S), MQTT, Azure MQTT
MQTT GATEWAY
 
 
MQTT Gateway

 
Allows sending commands and receiving data from MODBUS Master through MQTT broker
DNP3
 
 
Supported modes

 
TCP Master, DNP3 Outstation
SYSTEM CHARACTERISTICS
 
CPUMediatek MIPS 24Kc 580 MHz
RAM128 MB, DDR2
FLASH storage

 
16 MB, SPI Flash
INPUT / OUTPUT
 
 
Input1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high
Output1 x Digital Output, Open collector output, max output 30 V, 300 mA
EventsEmail, RMS, SMS
I/O juggler

 
Allows to set certain I/O conditions to initiate event
POWER
 
 
Connector4-pin industrial DC power socket
Input voltage range9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
PoE (passive)Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 50 VDC
Power consumption

 
< 6.5 W Max
PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS; SIM)
 
Ethernet2 x RJ45 ports, 10/100 Mbps
I/O’s1 x Digital Input, 1 x Digital Output on 4-pin power connector
Status LEDs3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
SIM1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
Power1 x 4-pin power connector
Antennas2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors
Reset

 
Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
 
Casing materialAluminium housing, plastic panels
Dimensions (W x H x D)83 x 25 x 74 mm
Weight125 g
Mounting options

 
Bottom and sideways DIN rail mounting slots
PACKAGE CONTAINS
 
 
  • Router RUT241
  • 9 WEU  PSU
  • 2x LTE antennas (swivel, SMA male)
  • 1 x WiFi antenna (swivel, RP-SMA mal)
  • Ethernet cable (1.5 m)
  • SIM Adapter kit
  • QSG (Quick Start Guide)
  • RMS Flyer
  • Packaging box


 
Ethernet Ports: 1, 2
Mobilfunkstandards: 2G, 3G, 4G
SIM Karten Slots: 1
Wifi Standards: Dual-Band 802.11 b/g/n/ac, 2.4 GHz 802.11 b/g/n

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Zubehör

Tip
Teltonika BAT120 uninterrupted power supply
The BAT120 allows users to power a compatible Teltonika Networks device for up to 6 hours. It has reverse polarity and overvoltage protection for the input and 3A overcurrent protection for the output.This rugged and uninterruptible power source is perfect for applications that require constant connectivity from their Teltonika Networks devices, even when power outages or fluctuations occur.HIGHLIGHTS- 4-pin industrial DC outlet- 2300 mAh 17 Wh battery capacity- 3A overcurrent protection- Reverse polarity protection, overvoltage protection- 2 x 18650 Li-Ion cells- compatible with RUT2xx, RUT95x, RUT3xx, RUTXxx, TRB14x, TRB2xx, TSW110, TCR100PACKAGE CONTENTS- BAT120- 24W POWER SUPPLY- 4-pin to 4-pin power cord- QSG (Quick Start Guide)- packing box

From €81.00*
Teltonika Compact DIN Rail KIT PR5MEC11
TECHNICAL DATA Mounting type        35 mm DIN RailMaterial                   ABS + PC plasticDimensions             70 x 25 x 14.5 mmScrews included     Philips Pan head screw #6-32×3/16, 2 pcs 

€2.80*
%
Teltonika DIN RAIL KIT PR5MEC00

€5.12* €5.50* (6.91% saved)
Teltonika PR1KC640 5G COMBO MIMO MOBILE/GNSS/WIFI ROOF SMA ANTENNA
MECHANICAL/ENVIRONMENTAL Mounting methodScrewRadome ingress protection ratingIP65 (exclude cable outlet)Radome materialUV-Resistant ABS/PCHousing dimensions189 x 182 x 85 mmCable7 x LMR100, 3000 mmOperating temperature- 40 ~ +85 °CWeight535 ± 10 gRecomended mounting dimensionsHole ø28 mm, panel thickness MAX 8 mmRoHS Compliant✓ 5G MOBILE MIMO ANTENNA  Frequency Range617 - 960 / 1710 - 2690 / 2900 - 4200 MHzPolarizationLinearGain4.0 dBiV.S.W.R≤3.0Impedance50 ΩConnector type and count4x SMA Male GNSS ANTENNA  Frequency range1164 - 1300 / 1559 - 1610 MHzPolarizationRHCPLNA Gain40 ± 2 dBV.S.W.R< 2.0Impedance50 ΩSupply voltage3 - 12 VDCCurrent consumption≤60 mAConnector type and count SMA MaleWIFI MIMO ANTENNA  Frequency range2400 - 2483.5 / 4900 - 5925 MHzPolarization LinearGain4.0 dBiV.S.W.R< 2.5Impedance50 ΩConnector type and count2x RP-SMA Male  

€99.50*
Teltonika PR1KCL25 - Combo MIMO Mobile Roof SMA Antenna
Combo-MIMO Mobile Dachantenne SMA   Frequency Range:         698-960/1710-2690 MHzPolarization                   LinearMain antenna gain        2.5 dBiAux antenna gain          2.0 dBiV.S.W.R                         <3.0Impedance                    50 ΩConnector                     SMA Male

€13.20*
Teltonika PR1KCL28 COMBO QUAD MOBILE/GNSS ROOF SMA ANTENNA
MECHANICAL/ENVIRONMENTAL Mounting methodScrewRadome ingress protection ratingIP65 (exclude cable outlet)Radome materialUV resistant plastic and cableHousing dimensionsØ 110.0 x 53.0 mmCable5x RG174, 3000 mmOperating temperature- 40 ~ +85 °CWeight525 ± 10 gUV resistance✓RoHS compliant✓ GNSS ANTENNA  Frequency range1575.42 ± 3 MHzPolarizationRHCPLNA gain28 ± 2 dBLNA noise figure≤ 1.5 dBV.S.W.R< 2.0Impedance50 ΩSupply voltage3 – 5 VDCCurrent consumption< 15 mAConnector type and count SMA MaleLTE MIMO ANTENNA  Frequency range698 – 960, 1710 – 2690 MHzPolarizationLinearGain3.0 dBiV.S.W.R< 3.0Impedance50 ΩConnector type and count 4x SMA Male  

€45.00*
Teltonika PR1KCO28 COMBO MIMO MOBILE/GNSS/WIFI ROOF SMA ANTENNA
MECHANICAL/ENVIRONMENTAL Mounting methodScrewRadome ingress protection ratingIP65 (exclude cable outlet)Radome materialABSHousing dimensionsØ 110 x 55 mmCable5x RG174, 3000 mmOperating temperature- 40 ~ +85 °CWeight535 ± 10 gRoHS Compliant ✓GNSS ANTENNA  Frequency range1575.42 – 1610 MHzPolarizationRHCPLNA gain28 ± 2 dBLNA noise figure≤ 1.5 dBV.S.W.R< 2.0Impedance50 ΩSupply voltage3 – 5 VDCCurrent consumption< 15 mAConnector type and count SMA MaleLTE MIMO ANTENNA  Frequency range698 – 960, 1710 – 2690 MHzPolarizationLinearGain3.0 dBiV.S.W.R< 3.0Impedance50 ΩConnector type and count 2x SMA MaleWIFI ANTENNA  Frequency range2400 – 2483.5, 4900 – 5825 MHzPolarization LinearGain2.0 dBiV.S.W.R< 2.5Impedance50 ΩConnector type and count2x RP-SMA Male  

€38.00*
Teltonika PR1KCS28 COMBO SISO Mobile/GNSS/WIFI Roof SMA Antenna
1 x WiFi SMA Connector 1 x LTE SMA Connector 1 x GNSS SMA Connector

€23.10*
Teltonika PR1KRF30 WIFI magnetic SMA Antenna
PARAMETER  Frequency range 2400 ~ 2500 MHzPolarization LinearGain 3.0 dBiVSWR 2.0Impedance 50 ΩCable RG174, 1500 mmConnector type RP-SMA MaleMounting method MagnetRoHS compliant ✓

€6.60*
Teltonika PR1KS210 Mobile magnetic SMA Antenna
PARAMETER  Frequency range 699 ~ 868, 1850 ~ 2690 MHzPolarization LinearGain 1.0 dBiVSWR 3.0Impedance 50 ΩCable RG174, 3000 mmConnector type SMA MaleMounting method MagnetRoHS compliant ✓

€5.50*
Teltonika PR1URF51 WiFi SMA Antenne

€5.52*
Teltonika PR1US440 mobile SMA Antenne

€5.90*
Teltonika PR1US450 angled compact mobile Antenna
PARAMETER                RATED VALUE Frequency Range        700-2700 MHzPolarization                 LinearGain                            5.0 dBiV.S.W.R                       ≤ 1.8Input Impedance        50 ΩConnector                  SMA Male (straight)  

€4.40*
Teltonika PR2LA15B Ethernet cable 1.5M

€1.65*
%
Teltonika PR5MEC12 | Surface Mounting Kit for TELTONIKA Router
With the surface mounting kit you can easily mount your TELTONIKA router on flat surfaces. STANDARD PACKAGE CONTAINSSurface mounting kitPhilips Pan Head screw #6-32×3/16, 2pcs

€3.20* €3.30* (3.03% saved)
Teltonika PR5MEC15 Connector Set

€4.50*
Teltonika PR5MEC22 Surface Clip Holder Kit
STANDARD PACKAGE CONTAINSSurface Clip Holder KitSelf-tapping screws: DIN 14566 (4.2 mm x 32 mm), 2 pcs; Plastic expansion anchors: 6 mm x 30 mm, 2 pcs

€2.80*
Teltonika RMS Credits
Teltonika Networks Remote Management System is an all-in-one, user-friendly IoT platform providing an easy way to stay on top of your connected solution. It is a powerful software that allows for remote access and management of all connected Teltonika Networks and third party devices.   You need one credit per device per month. 

From €1.50*
Teltonika TAP200
Wi-Fi 5 ACCESS POINTEquipped with dual-band technology, fast roaming, and an RJ45 port with PoE-in functionality, the Teltonika Networks TAP200 is a Wi-Fi 5 wireless access point designed to enhance Wi-Fi coverage in medium-density spaces where high network performance is essential. The TAP200 features an integrated mounting bracket for quick and easy installation, and a sleek design to seamlessly blend into retail, enterprise, or any other environment.     WIRELESS  Wireless mode802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO)WiFi securityWPA2-EAP/WPA3-EAP Mixed Mode, WPA3-EAP, WPA2-PSK/WPA3-SAE Mixed Mode, WPA3-SAE, OWE, WPA-PSK/WPA2-PSK Mixed Mode, WPA2-PSK, WPA2-EAP; AES-CCMP, TKIP, Auto Cipher modes, isolate clientsSSID/ESSIDESSID stealth mode (Hide SSID)WiFi usersUp to 100 simultaneous connectionsWireless mesh/roamingFast roaming (802.11r)Wireless MAC filterWhitelist, blacklistWireless QR code generatorOnce scanned, a user will automatically enter your network without needing to input login information.  ETHERNET  Ethernet1 x RJ45 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover NETWORK  Network protocolsTCP, UDP, IPv4, IPv6, ICMP, HTTP, HTTPS, SSL/TLS, ARP, SSH, DHCP client, SNMP SYSTEM CHARACTERISTICS CPUMediaTek, Dual-Core, 880 MHz, MIPS 1004KcRAM256 MB, DDR3FLASH storage 16MB, SPI NOR FlashPOWER  ConnectorRJ45 SocketInput voltage range44.0 – 57.0 VPoE standards802.3af PoE Class 1Power consumption Idle: < 4 W / Max: < 5.5 WPHYSICAL INTERFACES (PORTS, LEDS, BUTTONS; SIM) Ethernet1 x RJ45 port, 10/100/1000 MbpsStatus LEDs1 x Power LED (can be turned off from web-UI)Antennas 2 x Internal for 2.4 GHz Wi-Fi, 2 x Internal for 5 GHz Wi-FiAntennas specifications2 x 2400 - 2500 MHz, 50 Ω, VSWR <2.7, gain < 4.9 dBi, omnidirectional2 x 5150 - 5850 MHz, 50 Ω, VSWR <2, gain < 5.02 dBi, omnidirectionalReset Reboot/User default reset/Factory reset buttonPHYSICAL SPECIFICATION Casing materialUV stabilized plasticDimensions Ø 158 mm x 30 mmWeight190 gMounting options AP Mounting Bracket (for ceiling mount)OPERATING ENVIRONMENT Operating temperature-40 °C to 75 °COperating humidity10% to 90% non-condensingIngress Protection RatingIP30 STANDARD PACKAGE* Access Point TAP200QSG (Quick Start Guide)Wi-Fi Information stickerPackaging box*Standard package contents may differ based on standard order codes. 

€40.95*
%
Teltonika TSW010 Rail Switch 5

€32.20* €35.00* (8% saved)
%
Teltonika TSW100 PoE+ Switch 5 10/100/1000 ports

€94.00* €100.00* (6% saved)
%
Teltonika TSW110 Switch 5 10/100/1000 ports

€65.80* €70.00* (6% saved)
Teltonika TSW114 Gigabit Din Rail Switch
STANDARD PACKAGE CONTAINS TSW114 QSG (Quick Start Guide) Packaging box

€56.70*
Teltonika TSW202
MANAGED PoE+ SWITCH TSW202 is the first-ever Teltonika Networks managed PoE+ switch, designed to provide granular network management capabilities while centralizing power distribution. This PoE+ switch enables flexibility over solution management and power supply and enhances M2M communication by supporting a wide range of industrial protocols, including EtherNet/IP, Profinet, and MRP. The TSW202 has 2 high-performance SFP ports for long-range fibre optic communication and 8 Gigabit Ethernet ports providing 30 W of power each.    ETHERNET  ETHMulti-layer managed 8 x ETH ports, 10/100/1000 Mbps supports auto MDI/MDIX crossoverFibre2 x SFP portsIEEE 802.3 series standards IEEE 802.1p, IEEE 802.1Q, 802.3azPOE OUT  PoE portsPort 1 - 8PoE standards802.3af and 802.3at Alternative BPoE Max Power per Port (at PSE)30 WTotal PoE Power Budget (at PSE) 240 WMaximum Ethernet cable length100 m SERVICES  EtherNet/IPYesProfinet (class B)YesSNMP V2, V3YesLLDPYes SYSTEM CHARACTERISTICS RAM128MB, DDR3FLASH storage 16 MB serial flashNETWORK  MRPMRP client role, MRP manager roleL2 featuresLoop protection, Forwarding table, VLAN, STP/RSTPDHCPDHCP server, DHCP clientPort Settings Enable/disable, link speed control, port isolation, PoE Management, EEE (802.3az) management, Port MirroringL3 Features Static IPv4 routing, static IPv6 routing, DHCPv6 client, static IPv6 addressPOWER  Connector2-pin industrial DC power socketInput voltage range7 – 57 VDCPoE (passive)44 – 57 VDCPower consumption Idle: < 3 W / Max: 8 W / PoE Max: 248 WPHYSICAL INTERFACES  Ethernet8 x RJ45 ports, 10/100/1000 MbpsFibre2 x SFP portsStatus LEDs1 x Power LED, 1 x Aux LED, 16 x ETH status LEDs, 2 x SFP status LEDsPower1 x 2-pin industrial DC power socketResetSoftware reset buttonOther1 x Grounding screw PHYSICAL SPECIFICATION Casing materialAnodized aluminum housing and panelsDimensions (W x H x D)132 x 44.2 x 122.2 mmWeight610 gMounting options Integrated DIN rail bracket, wall mounting (additional kit needed), flat surface placementPACKAGE CONTAINS*  TSW202QSG (Quick Start Guide)Packaging box *Standard package contents may differ based on standard order codes. 

€128.00*