#
Skip to main content Skip to search Skip to main navigation

Teltonika TRB140 industrial rugged LTE Gateway

Product information "Teltonika TRB140 industrial rugged LTE Gateway"

 

TRB140 is an ultra-small, lightweight, and energy-efficient IoT device with mission-critical LTE Cat 4 and Gigabit Ethernet connectivity options.
Linux environment offers a high degree of customization. 
This gateway is perfect for projects and applications where a single device must be upgraded with reliable and secure internet connectivity.

 

MOBILE

 

 

Mobile module

4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

Status

4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

USSD

Supports sending and reading Unstructured Supplementary Service Data messages

Black/White list

Operator black/white list (by country or separate operators)

Multiple PDN

Possibility to use different PDNs for multiple network access and services

Band management

Band lock, Used band status display

APN

Auto APN

Bridge

Direct connection (bridge) between mobile ISP and device on LAN

Passthrough

Gateway assigns its mobile WAN IP address to another device on LAN

NETWORK

 

 

Routing

Static routing

Network protocols

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)

VoIP passthrough support

H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring

Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall

Port forward, traffic rules, custom rules

Firewall status page

View all your Firewall statistics, rules, and rule counters

Ports management

View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on

Network topology

Visual representation of your network, showing which devices are connected to which other devices

Hotspot

Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes

DHCP

Static and dynamic IP allocation, DHCP Relay

QoS / Smart Queue Management (SQM)

Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS

Supported >25 service providers, others can be configured manually

Network backup

Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

SSHFS

Possibility to mount remote file system via SSH protocol

 

ETHERNET

 

 

Ethernet

 

 

1 x ETH ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

MODBUS 

 

 

Supported modes

Server, Client

Supported connection types

TCP

Custom registers

 

 

MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality

Supported data formats

8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

 

MQTT GATEWAY

 

 

MQTT Gateway

 

 

Allows sending commands and receiving data from MODBUS Server through MQTT broker

DNP3

 

 

Supported modes

 

 

TCP Master, DNP3 Outstation

SYSTEM CHARACTERISTICS

 

CPU

ARM Cortex-A7 1.2 GHz

RAM

128 MB, DDR2

FLASH storage

 

 

512 MB, SPI Flash

INPUT / OUTPUT

 

 

Input

1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

Output

1 x Digital Output, Open collector output, max output 30 V, 300 mA

Events

Email, RMS, SMS

I/O juggler

 

 

Allows to set certain I/O conditions to initiate event

POWER

 

 

Connector

4-pin industrial DC power socket

Input voltage range

9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max

PoE (passive)

Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC

Power consumption

 

 

< 5 W

PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS; SIM)

 

Ethernet

1 x RJ45 port, 10/100/1000 Mbps

I/O’s

1 x Digital Input, 1 x Digital Output on 4-pin power connector

Status LEDs

3 x connection type status LEDs, 5 x connection strength LEDs, 2 x LAN status LEDs, 1x Power LED

SIM

1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V

Power

1 x 4-pin power connector

Antennas

1 x SMA for LTE

USB

 

 

1 x Virtual network interface via micro USB

Reset

Reboot/User default reset/Factory reset button

 

PHYSICAL SPECIFICATION

 

Casing material

Aluminium housing

Dimensions (W x H x D)

74.5 x 25 x 64.4 mm

Weight

134 g

Mounting options

 

 

Bottom and sideways DIN rail, Flat surface

PACKAGE CONTAINS

 

 

  • TRB140 
  • 9 W EU PSU PR3PUEU3
  • 1x Mobile antenna (magnetic mount, SMA male, 3 m cable)
  • Micro-USB cable (0.8 m)
  • 1x hex key
  • LAN cable
  • QSG (Quick Start Guide)
  • Packaging box

 

 

Mobilfunkstandards: 2G, 3G, 4G

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Zubehör

slide 6 to 10